Conventional Curbs
body
UCC-Vertical Pipe Curb
Conventional Roof Curb with Pipe Flashing

UCC-Vertical Pipe Curb
Conventional Roof Curb with Pipe Flashing
Application
UCC-Vertical Pipe Curb is a one-piece curb with 18ga. Galvanized steel shell and baseplate; 18ga. cover with vertical pipe flashing; available in UCC-1, 2, 3 & 5 models.

Insulated Curb Cover
Insulated Curb Cover

Insulated Curb Cover
Insulated Curb Cover
Application

UCC-2
Integral Cant, Insulated Curb for non-Insulated Roof Deck

UCC-2
Integral Cant, Insulated Curb for non-Insulated Roof Deck
Application
The UCC-2 is a one-piece curb with 18ga. Galvanized steel shell and baseplate; 8 minimum height

UPP-1
Pipe Portal, 1 connection
UPP-1
Pipe Portal, 1 connection
Application
Conventional roof curb with vertical pipe flashing and cover; for use with pipe penetrations from 3/8 to 6" diameter."

UPP-4
Pipe Portal, 4 connections
UPP-4
Pipe Portal, 4 connections
Application
Conventional roof curb with vertical pipe flashing and cover; for use with pipe penetrations from 3/8 to 6" diameter."

UCC-1
Raised Cant, Insulated Curb for Built-up Insulated Roof

UCC-1
Raised Cant, Insulated Curb for Built-up Insulated Roof
Application
The UCC-1 is a one-piece curb with 18ga. Galvanized steel shell and baseplate, 10 minimum height

UCC-3
Self-Flashing, Insulated Curb for Single Ply EPDM Roof

UCC-3
Self-Flashing, Insulated Curb for Single Ply EPDM Roof
Application
The UCC-3 is a one-piece curb with 18ga. Galvanized steel shell and baseplate; 12 minimum height

UCC-5
Self-Flashing, Non-Insulated Curb for Insulating in the field

UCC-5
Self-Flashing, Non-Insulated Curb for Insulating in the field
Application
The Model UCC-5 is a one-piece curb with 18ga. Galvanized steel shell, 12 minimum height

Square to Round Cover
Square to Round Cover

Square to Round Cover
Square to Round Cover
Application

Two Piece Curbs
Two Piece Curbs (for large equipment removable through roof).

Two Piece Curbs
Two Piece Curbs (for large equipment removable through roof).
Application
This two piece roof curb design is ideal for access through the roof with large equipment. It becomes an integral part of the roof system, while allowing the upper portion to be removed for access. United Enertech supplied this curb (see photo's & drawing of 40'x 40'x 7'H ) on the Spallation Neutron Source Target Building at Oak Ridge National Laboratories in Oak Ridge, TN. The following was taken from the Chattaqnooga times free press: OAK RIDGE, Tenn.--Along the Chesnut Ridge overlooking where scientist built the first atomic bomb during World War II, the nation's biggest civilian project is taking shape. Bulldozer's have dug enough clay to fill the University of Tennessee's Neyland Stadium while carving out a half-mile long, underground track where, within three years, subatomic elements will be scattered and studied. Scientists hope the Spallation Neutron Source facility will lead to revolutionary breakthroughs in everything from manufacturing to medicine. This is not a facility to do one big experiment. Instead, it's going to answer thousands of smaller scientific questions across a lot of fields and, in the process, produce incredible benefits for our country and this region, said Thomas Mason

UCC-Vented
Vented Conventional Roof Curb

UCC-Vented
Vented Conventional Roof Curb
Application
UCC-Vented is a one-piece vented curb with 18ga. Galvanized steel shell and baseplate; available in UCC-1, 2, 3 & 5 models.