Products

Architectural Louvers, Dampers, Roof Curbs, Actuators, Grilles, Sunshades and more.

 


Model:MS (176 lb-in)
Honeywell MS Series 176 lb-in


APPLICATION

 


Model:Architectural Grille
Architectural Grille


APPLICATION

Architectural Grilles are manufactured by United Enertech to be used on the interior or exterior of a building, possibly in front of a standard wall louver. The "Louver-Tex" or Slant Blade-Tex" can be used as a sight or sunscreen.

 
ARCHITECTURAL GRILLE DOCUMENTS
 - Submittal Sheet


Model:BF
Butterfly Spring Operated Round Damper


APPLICATION

The Model BF is a small, round, aluminum, spring loaded, butterfly damper designed through size 16" diameter for pressure through .30 w.c. The Model BF offers a EDPM rubber gasket and a galvanized steel housing. It can be installed in any position and requires .04 to .08 w.c. to open.

 


Model:ICB-900
Industrial Duty Airfoil Rectangular Damper up to 8 1/2" w.g.


APPLICATION

The Model ICB-900 is a heavy duty flanged frame style industrial backdraft damper. This model offers a hollow airfoil blade and is designed to control backflow and provide shutoff HVAC or industrial process control systems. The Model ICB-900 is extremely versatile, allowing its capabilities to be tailored to the application.

 


Model:ICB-800
Industrial Duty Rectangular Damper up to 8 1/2" w.g.


APPLICATION

The Model ICB-800 is a heavy duty flanged frame style industrial backdraft damper designed to control backflow and provide shut off in HVAC or industrial process control systems. The variety of optional features makes it extremely versatile, allowing its capabilities to be tailored to the application.

 


Model:ICB-950
Industrial Duty Steel Airfoil Rectangular Damper
up to 8 1/2" w.g.



APPLICATION

The Model ICB-950 is an all steel heavy duty flanged frame style industrial backdraft damper. This model offers a hollow airfoil blade and is designed to control backflow and provide shutoff HVAC or industrial process control systems. The Model ICB-950 is extremely versatile, allowing its capabilities to be tailored to the application.

 


Model:I-900
Industrial Round Damper up to 10"w.g.


APPLICATION

The Model I-900 is a heavy duty flanged frame style industrial backdraft damper that is designed to control backflow nad provide shut-off in HVAC or industrial process control systems. This model can operate in vertical and horizontal positions.

 


Model:PRI-FL
VAV Terminal-Round to Rectangular


APPLICATION

The Model PRI-FL is a VAV terminal that has a mechanically sealed, gasketed, and leak resistant housing. The standard features of the PRI-FL include an aluminum formed air flow sensor, 1/2" black fiber glass insulation, and a solid machined aluminum damper shaft. 3/8" and 1" thick fiber free insulation is also available.

 


Model:RI-FL
VAV Terminal-Round to Round


APPLICATION

The Model RI-FL is a damper that has the flexibility to mount various actuators and controls. The model RI-FL comes standard with a built in cross flow sensor with a cylinder for multi-point pick up averaging. The terminal also includes a gasket for low leakage air control, and a 1/2" solid aluminum shaft.

 


Model:RI-K, CD-100-K
Rectagular and Round By-Pass Damper


APPLICATION

The Model RI-K is a galvanized steel round by-pass damper to be used with VAV terminals. This model also includes a static pressure sensor.

 


Model:FL-R
Flow Ring


APPLICATION

The Model FL-R has been developed in response to contractors requiring a multi-point flo-cross to retrofit and control air in existing systems.

 



Model:MI-A , OB-A
Small Motorized Dampers


APPLICATION

The Models MI-A (round) and OB-A (rectangular) are small motorized dampers. The Model MI-A is galvanized and includes a low leak gasket as well as an actuator with minimum position stop. The Model OB-A has .081 extruded aluminum frame and blades, minimum position stop actuator, and bronze oilite bearings.

 


Model:CH-10-R
Small Dampers with (spring return) Actuator


APPLICATION

The Chicago Damper was developed in response to retrofit bathrooms in high rise hotels, office buildings, and apartment buildings. They are also recommended for new construction.

 


Model:CH-10
Small Dampers with (spring return) Actuator


APPLICATION

The Chicago Damper was developed in response to retrofit bathrooms in high rise hotels, office buildings, and apartment buildings. They are also recommended for new construction.

 


Model:RI-F
Round Damper Flanged up to 6


APPLICATION

The Model RI-F is a round control damper with a flanged style frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety of optional features makes the Model RI-F extremely versatile, allowing its capabilities to be tailored to the application.

 


Model:RI-F-O
Oval Damper Flanged up to 5


APPLICATION

The Model RI-F-O is an Oval control damper with a flanged style frame. It is designed to control airflow and provide shutoff in HVAC or industrial process control systems.

 


Model:HD-292
Level IV Industrial Damper up to 5" w.g.


APPLICATION

A heavy duty round industrial control damper with a flanged style frame. Designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety of optional features make it extremely versatile, allowing its capabilities to be tailored to the application.

 


Model:HD-392
Level V Industrial Damper up to 10" w.g.


APPLICATION

The Model HD-392 is a Heavy Duty round control damper with a flanged style frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety of optional features makes the H-392 extremely versatile, allowing its capabilities to be tailored to the application.

 


Model:HD-492
Level VI Industrial Damper up to 20" w.g.


APPLICATION

The Model HD-492 is a heavy duty round control damper with a flanged style frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems.

 


Model:RI
Control Damper #RI


APPLICATION

The Model RI is a round damper that includes a low leakage gasket and a mounting plate for actuators.

 


Model:HD-492-ISO
Industrial Isolation Damper


APPLICATION

The Model HD-492-ISO is a heavy duty round isolation damper with a flanged style frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems.

 


Model:UMB-1
One Piece Curb with Integral Rib Closures, Use with R & SSR panels


APPLICATION

The Model UMB-1 is a one-piece curb with 18ga. Galvalume steel shell and baseplate; 8" minimum height, cricket water diverter, insulated, internal angle reinforcing with mitered corners and watertight welds, integral rib closures, prime painted after fabrication.

 


Model:Pak-10
High Rise Energy Saving Damper


APPLICATION

THe Pak-10 is designed to maximize energy efficiency and has a simple installation process. This flexible design can handle job specific CFM requirements. A removable panel makes the actuator easily accessible. The Pak-10 installs easily behind the grille and drywall depths of 1/2", 5/8" or 3/4". It works well for retro-fit or new construction applications.

 


Model:MI-MZ-1, OB-MZ-1
Modulating Motorized Damper for Low Pressure Systems


APPLICATION

The MZ systems are simple, stand alone, single zone systems that work independently of the HVAC unit to maintain temperature setpoint.

 


Model:CD-100-ERC
Electric Remote Control Systems


APPLICATION

The United Enertech "Electric Remote Control Systems" was developed as an alternative to manual cable remote systems. It provides personal convenience and a positive means of individual room or zone air flow. In addition, outside air intake or exhaust can be controlled. It allows 0-100% airflow control. The system is composed of an electric wall controller and matching actuator. A single controller will operate up to 10 actuators at up to 3000ft away. All United Enertech dampers and adjustable louvers are available with this option.

 


Model:BB
Security Bars


APPLICATION

 


Model:BB-S
Maximum Security Sleeved Barrier


APPLICATION

 


Model:MS-P-4
Maximum Security


APPLICATION

 


Model:MS-P-3
Maximum Security


APPLICATION

 


Model:MS-P-2
Maximum Security


APPLICATION

 


Model:MS-FB
Maximum Security


APPLICATION

 


Model:MS-P-1
Maximum Security


APPLICATION

 


Model:MN-FB
Minimum Security


APPLICATION

 


Model:MS-SP
Medium Security


APPLICATION

 


Model:UMB-2
One Piece Curb with Loose Rib Closures - Use with R & SSR panels


APPLICATION

The Model UMB-2 is a one-piece curb with 18ga. Galvalume steel shell and baseplate; 8" minimum height, cricket water divider, insulated, internal angle reinforcing with mitered corners and watertight welds; loose rib closures, prime painted after fabrication.

 


Model:UMB-4
One Piece Curb with Integral Rib Closures (downhill side) - Use with R & SSR Panels


APPLICATION

The Model UMB-4 is a one-piece curb with 18ga. Galvalume steel shell and baseplate; 8" minimum height, cricket water divider, insulated, internal angle reinforcing with mitered corners and watertight welds; loose rib closures-downhill only, prime painted after fabrication.

 


Model:UMB-5
One Piece Curb with Integral Rib Closures - Use with R & SSR Panels


APPLICATION

The Model UMB-5 is a one-piece curb with 18ga. Galvalume steel shell and baseplate; 8" minimum height, cricket water divider, insulated, internal angle reinforcing with mitered corners and watertight welds; integral rib closures, prime painted after fabrication.

 


Model:UMB-6
Three Piece Curb with Integral Rib Closures on Plates - Use with R & SSR Panels


APPLICATION

The Model UMB-6 is a three-piece curb with 18ga. Galvalume steel shell and baseplate; 8" minimum height, cricket water divider, insulated, internal angle reinforcing with mitered corners and watertight welds; integral rib closures on plates uphill and downhill, prime painted after fabrication.

 


Model:UMB-7
Two Piece Curb with Loose Rib Closures - Use with R & SSR Panels


APPLICATION

The Model UMB-2 is a two-piece curb with 18ga. Galvalume steel shell and baseplate; 8" minimum height, water divider plate, insulated, internal angle reinforcing with mitered corners and watertight welds; loose rib closures, prime painted after fabrication.

 


Model:UMB-8
Two Piece Curb with Integral Rib Closures - Use with R & SSR Panels


APPLICATION

The Model UMB-8 is a two-piece curb with 18ga. Galvalume steel shell and baseplate; 8" minimum height, water divider plate, insulated, internal angle reinforcing with mitered corners and watertight welds; integral rib closures, prime painted after fabrication.

 


Model:PSED-5.1
Wind Driven, Sight Proof, Drainable, Extruded Aluminum


APPLICATION

 


Model:PVV-10
Vertical Blade, Wind Driven, Drainable, Extruded Aluminum


APPLICATION

 


Model:FSD-5CD-CLI
1 Hour Corridor Damper


APPLICATION

The FSD-5CD-CLI is a combination fire and smoke damper that is UL classified for interior tunnel corridor ceiling penetrations. WHen installed in a tunnel-like corridor ceiling, the damper assembly carries a 1hr UL555 fire rating and a Class I UL555S Leakage rating. This damper also has a 1.5hr fire rating. Class I leaking rating and can be installed in a wall or floor that is rated for up to 3hrs. It may be mounted horizontally or vertically, is approved for bi-directional airflow, and is rated to 2000 FPM and 4" static pressure in compliance with UL555 6th edition and UL555S 4th edition.

 


Model:FSD-5CD-CLII
1 Hour Corridor Damper


APPLICATION

The FSD-5CD-CLII is a combination fire and smoke damper that is UL classified for interior tunnel corridor ceiling penetrations. When installed in a tunnel-like corridor ceiling, the damper assembly carries a 1hr UL555 fire rating and a Class II UL555S Leakage rating. This damper also has a 1.5hr fire rating. Class II leaking rating and can be installed in a wall or floor that is rated for up to 3hrs. It may be mounted horizontally or vertically, is approved for bi-directional airflow, and is rated to 2000 FPM and 4" static pressure in compliance with UL555 6th edition and UL555S 4th edition.

 


Model:FSD-50W-CLI
Grille Access "Out of Wall" Combination Fire/Smoke Damper


APPLICATION

The FSD-50W-CLI is a combination fire & smoke damper with a with a 1.5hr fire rating and a Class I UL555S Leakage rating. This damper utilizes a thermally responsive electric switch to allow for the return spring of the specified actuator to close the damper upon elevated temperature. The damper is designed for out of partition applications and profide grille access to internal mounted actuators and accessories. This damper has been evaluated with bi-directional airflow, and is rated to 2000 FPM and 4" static pressure in compliance with UL555 6th edition and UL555S 4th edition.

 


Model:FSD-50W-CLII
Grille Access "Out of Wall" Combination Fire/Smoke Damper


APPLICATION

The FSD-50W-CLII combination fire and smoke damper is a 1.5hr fire and Class II leakage rated damper designed for "out of partition" applications, amd provides grill access to internal mounted actuators and accessories. The Model FSD-50W-CLII has been qualiefid for use in HVAC systems with duct velocities upp to 2000 FPM and static pressures up to 4" water guage, in compliance with UL555 6th edition and UL555S 4th edition.

 


Model:FSD-5CD-CLIII
Grille Access "Out of Wall" Combination Fire/Smoke Damper


APPLICATION

The FSD-50W-CLIII combination fire and smoke damper is a 1.5hr fire and Class III leakage rated damper designed for "out of partition" applications, and provides grille access to internal mounted actuators and accessories. The Model FSD-50W-CLIII has been qualified for use in HVAC systems with duct velocities up to 2000 FPM and static pressures up to 4" water guage, in compliance with UL555 6th edition and UL555S 4th edition.

 


Model:DD-Series
General Purpose Exhaust Fan


APPLICATION

Furnish and install for exhaust applications where air movement is needed to control condensation and reduce stagnant air.

 
DD-SERIES DOCUMENTS
 - Submittal Sheet


Model:E-Series
Industrial Grade Fan


APPLICATION

Furnish and install for intake or exhaust applications where a quiet, economical, industrial grade fan is needed.

 


Model:LB-Series
Commercial Grade Fan


APPLICATION

Furnish and install for intake or exhaust applications where a quiet, economical, commercial grade fan is needed.

 


Model:RH-Series
Fan Powered Roof Top Ventilator


APPLICATION

Furnish and install for roof intake or exhaust ventilation applications which have high air flow capabilities.

 
RH-SERIES DOCUMENTS
 - Submittal Sheet


Model:RT-Series
Roof Top Industrial Grade Exhaust Fan


APPLICATION

Furnish and install for roof exhaust applications where a quiet, economical, industrial grade fan is needed.

 
RT-SERIES DOCUMENTS
 - Submittal Sheet


Model:MCP-3631
KMC Controls 3631 Series


APPLICATION

 


Model:MCP-1040
KMC Controls 1040 Series


APPLICATION

 


Model:FD-SAHG
Type A Curtain Fire Damper - Horizontal - Behind Grille - Round Collar Option


APPLICATION

 
FD-SAHG DOCUMENTS
 - Submittal Sheet


Model:F/S-3V-CR-I
Corridor Damper


APPLICATION

 
F/S-3V-CR-I DOCUMENTS
 - Submittal Sheet
 - Corridor Damper Installation Instructions
 - F/S-3V-CR-I/II Installation Instructions
 - B-21 Retaining Angles Installation Guide
 - B-22 STO-R Installation Guide
 - B-23 DTO-R Installation Guide
 - B-24 EFL Installation Guide
 - B-25 PFL Installation Guide
 - B-26 M/S Package Installation Guide
 - B-27 RCB Packages Installation Guide
 - B-28 Actuator Charts Installation Guide
 - B-30 Sealing Instructions Installation Guide
 - B-31 Transitions Installation Guide
 - B-32 Actuator Locations Installation Guide
 - B-34 Motor Locations Installation Guide
 - B-35 Smoke Detector Location Installation Guide
 - B-37 Smoke Detector Installation Instructions for SM-501 Model
 - B-37 Smoke Detector Installation Instructions for SL-2000 Model
 - B-37 Smoke Detector Installation Instructions for HS-100 Model
 - O & M Instruction Sheet
 - F/S-3V-CR-I BIM (REVIT)
 - Zip of Fire/Smoke Damper Installation Instructions PDF's


Model:F/S-3V-CR-II
Corridor Damper


APPLICATION

 
F/S-3V-CR-II DOCUMENTS
 - Submittal Sheet
 - Corridor Damper Installation Instructions
 - F/S-3V- CR-I/II Installation Instructions
 - B-21 Retaining Angles Installation Guide
 - B-22 STO-R Installation Guide
 - B-23 DTO-R Installation Guide
 - B-24 EFL Installation Guide
 - B-25 PFL Installation Guide
 - B-26 M/S Package Installation Guide
 - B-27 RCB Packages Installation Guide
 - B-28 Actuator Charts Installation Guide
 - B-30 Sealing Instructions Installation Guide
 - B-31 Transitions Installation Guide
 - B-32 Actuator Locations Installation Guide
 - B-34 Motor Locations Installation Guide
 - B-35 Smoke Detector Location Installation Guide
 - B-37 Smoke Detector Installation Instructions for SM-501 Model
 - B-37 Smoke Detector Installation Instructions for SL-2000 Model
 - B-37 Smoke Detector Installation Instructions for HS-100 Model
 - O & M Instruction Sheet
 - F/S-3V-CR-II BIM (REVIT)
 - Zip of Fire/Smoke Damper Installation Instructions PDF's


Model:DCSED-5.1
5" Deep, Fixed Horiz. Blade, Extruded Aluminum Wind-Driven Rain / Hurricane Louver


APPLICATION

The Model DCSED-5.1 is a sight proof, drainable, wind-driven rain louver which incorporates a series of (11) vertical and (5) horizontal drains designed to protect the outside opening in building exterior walls. It is engineered for use in Miami-Dade County, FL and its municipalities as well as other regions that use Dade County codes. These louvers may be used for exhaust or intake air. Engineers can design with confidence as this product complies wi0th the Miami-Dade County Building Code. Model DCSED-5.1 is also approved for the 2014 version of the FBC as well as the Texas Department of Insurance.

 





Model:EL-1-GL
EL-1-GL PTAC Grille With Glazing Frame


APPLICATION

The EL-1 is generally used as a decorative louver or with PTAC applications.

 


Model:OD
Orifice Damper


APPLICATION

Orifice Damper, Galvanized Steel Construction, Manual control, Airflow Measurement Damper

 


Model:OD-SS
Orifice Damper, Stainless Steel


APPLICATION

Orifice Damper, 316 Stainless Steel, Manual Control, Airflow Measurement Damper.

 


Model:OD-M
Orifice Damper - Motorized


APPLICATION

Orifice Damper, Galvanized Steel Construction, Modulating Motor control, for Airflow Measurement.

 


Model:OD-PS
Orifice Damper - Positive Sealed


APPLICATION

Positive Sealed Orifice Damper, Galvanized Steel construction, Modulating Motor, For Airflow Measurement.

 


Model:RI-ERC
Round, Electric Remote Control, single blade damper


APPLICATION

The Electric Remote Control System was developed as an alternative to manual cable remote systems. A single controller will operate up to 10 actuators at up to 3000 feet away.

 


Model:GGD
Siemens GGD Series


APPLICATION

 


Model:GND
Siemens GND Series


APPLICATION

 


Model:BEH
ELODRIVE BEH Series


APPLICATION

 


Model:BNH
ELODRIVE BNH Series


APPLICATION

 


Model:ML
Honeywell ML Series


APPLICATION

 


Model:FD-SAVG
Curtain Fire Damper - 1-1/2 & 3 Hour - Vertical Static - Sleeved - Behind Grille


APPLICATION

UL classified for installation in walls, and partitions with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in static HVAC systems that automatically shuts down in the event of fire. (See optional 3 hr. rating)

 


Model:FD-SAHG
Curtain Fire Damper - 1-1/2 & 3 Hour - Horizontal Static - Sleeved - Behind Grille


APPLICATION

UL classified for installation in floors, and partitions with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in static HVAC systems that automatically shuts down in the event of fire. (See optional 3 hr. rating)

 


Model:FDD-SAVG
Curtain Fire Damper - 1-1/2 & 3 Hour - Vertical Dynamic - Sleeved - Behind Grille


APPLICATION

UL classified for installation in walls, and partitions with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in dynamic HVAC systems that automatically shuts down in the event of fire. Also approved for static systems. (See optional 3 hr. rating)

 


Model:FDD-SAHG
Curtain Fire Damper - 1-1/2 & 3 Hour - Horizontal Dynamic - Sleeved - Behind Grille


APPLICATION

UL classified for installation in floors, and partitions with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in dynamic HVAC systems that continues to run in the event of fire. Also approved for static systems. (See optional 3 hr. rating)

 


Model:BO-RI
Round Single Blade Damper


APPLICATION

The Model BO-RI was developed for air balancing at the mid/duct above inaccessible ceilings with Mechanical Push-Pull adjustments at a terminal controller.

 


Model:STAR SERIES
8" Airfoil Blade Sunshade


APPLICATION

The Star Series Sunshade is made up of 8" wide airfoil blades and knife shape outriggers.

 


Model:MARQUIS SERIES
8", 10", & 12" Airfoil Blade Sunshade


APPLICATION

The Marquis Series Sunshade is made up of 8", 10", & 12" wide Airfoil Blades & 6" Channel Fascia.

 


Model:APOLLO SERIES
6-1/2" Airfoil Blade Sunshade


APPLICATION

The Apollo Series Sunshade is made up of 6-1/2" wide Airfoil Blades & 2"x6" Tube Fascia.

 


Model:PRISM SERIES
6-1/2" Airfoil Blade/Round Fascia Sunshade


APPLICATION

The Prism Series Sunshade is made up of 6-1/2" wide Airfoil Blades & Round Tube Fascia.

 


Model:SOLARIS SERIES
6-1/2" Airfoil Blade/Tapered Outrigger Sunshade


APPLICATION

The Solaris Series Sunshade is made up of 6-1/2" wide Airfoil Blades, Tapered Outriggers, & 1-3/4" x 4" Fascia Tube.

 


Model:SENTRY SERIES
4" Airfoil Blade/Tapered Outrigger Sunshade


APPLICATION

The Sentry Series Sunshade is made up of 4" wide Airfoil Blades & Tapered Outriggers.

 


Model:CRIMSON SERIES
6" Airfoil Blade, Monumental/Tapered Outrigger Sunshade


APPLICATION

The Crimson Series Sunshade is made up of 6" wide Airfoil Blades & Monumental/Dual Tapered Outriggers.

 


Model:PARASOL SERIES
4" Z-Blade Sunshade


APPLICATION

The Parasol Series Sunshade is made up of 4" wide Z-blades & Knife Shape Outriggers.

 


Model:BARCLAY SERIES
4" Z-Blade/Radius Fascia Sunshade


APPLICATION

The Barclay Series Sunshade is made up of 4" wide Z-Blades & Radius Fascia on three sides.

 


Model:SOLARIUM SERIES
4" Z-Blade/Tapered Outrigger Sunshade


APPLICATION

The Solarium Series Sunshade is made up of 4" wide Z-Blades, Tapered Outriggers, & Round Tube Fascia.

 


Model:SOL SERIES
6-1/2" Batten Blade Sunshade


APPLICATION

The Sol Series Sunshade is made up of 6-1/2" wide Batten Blades & Round Tube Fascia.

 


Model:VINCI SERIES
Batten Blade Sunshade


APPLICATION

The Vinci Series Sunshade is made up of mulitple sized Batten Blades, Tapered Outriggers, & 3" Round Tube Fascia.

 


Model:ELON SERIES
4" Batten Blade Sunshade


APPLICATION

The Elon Series Sunshade is made up of 4" Batten Blades, Tapered Outriggers, & Angular Fascia.

 


Model:VISTA SERIES
6"x2" Batten Blade Sunshade


APPLICATION

The Vista Series Sunshade is made up of 6"x2" Tube Battens, 6"x2" Tube Fascia, & Tapered Outriggers.

 


Model:MODESTO SERIES
6-1/2" Batten Blade/Perforated Side Panel Sunshade


APPLICATION

The Modesto Series Sunshade is made up of 6-1/2" wide Batten Blades, Bull Nose Fascia, Tapered Outriggers, & Perforated or Solid Skin Side Panels

 


Model:CAMANA SERIES
Perforated or Solid Skin Sunshade/Lightshelf


APPLICATION

The Camana Series Sunshade/Lightshelf is available with perforated or solid metal skin.

 


Model:DESIGNER SERIES
Custom Designed Sunshades


APPLICATION

The Designer Series Sunshade Line is just what the name implies. Architects and Designers can create a job specific sunshade design from a variety of blade, outrigger, and fascia choices.

 


Model:RI-K
Control Damper #RI-K


APPLICATION

The Model RI-K is a round damper that includes a low leakage gasket, actuator, adjustable controller with LED lights, and static pressure sensor.

 


Model:EGG CRATE SCREEN
ARCHITECTURAL GRILLE


APPLICATION

 


Model:LOUVER-BLOC I
ARCHITECTURAL GRILLE


APPLICATION

 


Model:LOUVER-BLOC II
ARCHITECTURAL GRILLE


APPLICATION

 


Model:AIRFOIL-BLOC SCREEN
ARCHITECTURAL GRILLE


APPLICATION

 
AIRFOIL-BLOC SCREEN DOCUMENTS
 - Submittal Sheet
 - Airfoil-Bloc BIM (REVIT)


Model:LOUVER-TEX
ARCHITECTURAL GRILLE


APPLICATION

 


Model:SLANT BLADE-TEX
ARCHITECTURAL GRILLE


APPLICATION

 


Model:CUBE LOUVER SCREEN
ARCHITECTURAL GRILLE


APPLICATION

 
CUBE LOUVER SCREEN DOCUMENTS
 - Submittal Sheet
 - Cube Louver BIM (REVIT)


Model:OCT-TEX
ARCHITECTURAL GRILLE


APPLICATION

 


Model:DIAMOND-TEX SCREEN
ARCHITECTURAL GRILLE


APPLICATION

 
DIAMOND-TEX SCREEN DOCUMENTS
 - Submittal Sheet
 - Diamond-Tex BIM (REVIT)


Model:TRANTINA-TEX
ARCHITECTURAL GRILLE


APPLICATION

 


Model:PRISM SCREEN
ARCHITECTURAL GRILLE


APPLICATION

 


Model:MES-TEX
ARCHITECTURAL GRILLE


APPLICATION

 


Model:ELIPTICAL SCREEN
ARCHITECTURAL GRILLE


APPLICATION

 




Model:Jackshafting
Rectangular Industrial Dampers


APPLICATION

 
JACKSHAFTING DOCUMENTS
 - Submittal Sheet
 - Bearing Chart


Model:Maintenance
Rectangular Industrial Dampers


APPLICATION

 


Model:B0-RH,BO-110H
Diffuser/Grille Balancing Bowden Cable System


APPLICATION

The Diffuser/Grille Balancing Bowden Cable System was developed for air balancing through the face of a diffuser with simple push-pull adjustments at a looped cable end.

 


Model:Loose Rib Closures
Under/Over


APPLICATION

 



Model:CO-FM
Flush Mount Concentric Diffusers


APPLICATION

Model CO-FM is designed to fit into drop ceiling applications where flush mount supply/return diffuser boxes are required.

 
CO-FM DOCUMENTS
 - Submittal Sheet


Model:HD-DF-3/5
Heavy Duty Industrial Diffuser


APPLICATION

The Models HD-DF-3 and HD-DF-5 are designed for air dispersion in heavy duty and industrial applications. Model HD-DF-3 offers one row of blades which are fully adjustable. Model HD-DF-5 offers two rows of blades (horizontal and vertical) which can be independently positioned for optimal airflow.

 


Model:BRSED-5.1
5" Deep Blast Rated Wind Driven Rain Louver


APPLICATION

The BRFL-D-4 has been blast tested in accordance with ASTM F2927-12 to withstand a blast of up to 10.48 psi and an impulse of 64 psi-ms. The test yielded a damage rating of I (undamaged) with no breakage and minimal deflection (less than 1/8").

 


Model:CLARION SERIES
Vertical Perforated Sunshade


APPLICATION

Extruded Aluminum tube frame with integral tray to hold perforated alum. panels.

 


Model:PALISADE SERIES
Vertical dual panel perforated screen


APPLICATION

Extruded Aluminum tube frame with dual aluminum perforated panels.

 


Model:MACH SERIES
Create your own design, measure and cut field assembly


APPLICATION

The Mach Series sunshades include many options for blades, fascias, and outriggers. These are stock parts with quick lead times. Blades and fascia are clear anodized aluminum and outriggers are painted "clear anodized match" (paint meets AAMA 611)

 
MACH SERIES DOCUMENTS
 - Submittal Sheet


Model:D-HV-4
4" Deep Dual Blade Wind Driven Rain Louver


APPLICATION

4" Deep Aluminum High Performance Wind Driven Rain Louver. Class A wind driven rain data includes a minimum water penetration effectiveness of 99.1% at 974 fpm core velocity.

 


Model:FEMA-5
5.5" Deep Aluminum FEMA Grille


APPLICATION

The FEMA-5 is a heavy duty 5.5" deep aluminum grille designed to protect exterior wall openings against severe circumstances on FEMA 320 or 361 compliant safe rooms and storm shelters. It has been third party tested to withstand missile impacts of 15 lbs at 100 mph.

 


Model:X-11
X-11 In duct Air Quality Measuring Station


APPLICATION

The X-11 is a measuring station with a low leakage, high performance, extruded aluminum, airfoil blade damper. The primary sensing elements are aerodynamic head devices which generate a differential (velocity) pressure output signal. The sensor's basis of design is a cylindrical tube within a cylindrical tube which permits the simultaneous measurement of both impact (total) and static pressure. The total and static sensing port design reduces the need for an air straightening device. Station is standard with an electric actuator and PTS-4000 transducer.

 


Model:X-10
X-10 Air Measuring Station


APPLICATION

The X-10 is an air measuring station with sensing elements which are aerodynamic head devices that generate a (velocity) pressure output signal. The sensor's basis of design is a cylindrical tube within a cylindrical tube which permits the simultaneous measurement of both impact (total) and static pressure. The total static sensing port design reduces the need for an air straightening device. Station is standard with the model PTS-4000 transducer.

 


Model:XSD-130
5" Deep Wind Driven Rain louver


APPLICATION

The XSD-130 is a 5" Deep Wind Driven Rain louver designed to protect intake and exhaust openings in buildings while reducing the amount of wind driven rain penetration.

 


Model:System D-10-S
Supply Applications at Diffuser or Grille


APPLICATION

System D-10-S is a factory set constant volume control damper for supply applications at a diffuser or grille, composed of fire retardant plastics. It contains a self regulating airfoil damper blade and spring piston design to maintain a factory preset air volume.

 
SYSTEM D-10-S DOCUMENTS
 - Submittal Sheet


Model:MS (30 lb-in)
Honeywell MS Series 30 lb-in


APPLICATION

The MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) with an integral junction box for on/ off damper control. The actuator accepts an on/off signal from a single-pole, single-throw (spst) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring return and are designed to operate reliably in smoke control systems requiring Underwriter’s Laboratories Inc. UL555S ratings up to 350 °F.

 


Model:XSD-55
2" Deep Wind Driven Rain Louver


APPLICATION

The XSD-55 is a 2" deep wind driven rain louver. It has been tested and AMCA certified for wind driven rain, water penetration, and pressure drop. It provides resistance to the elements in a shallow envelope.

 


Model:MZD-100-3
Multi-Zone Damper (Triple Deck) (Standard Blade)


APPLICATION

Furnish and install at location shown on drawing or in accordance with schedules dampers meeting the following specifications: Rectangular damper shall have 0.125" [3.18mm] extruded aluminum blades and .081" [2.06mm] extruded aluminum frame. 1-1/2" x 8" x 1-1/2" 18ga. galvanized outer sleeve. Optional blade and jamb seals must be used to achieve optimal leakage rating. Damper to have thrust bushings and meet the low pressure drop equal to United Enertech MODEL MZD-100-3 (Triple-Deck).

 
MZD-100-3 DOCUMENTS
 - Submittal Sheet


Model:D-HV-6
Dual Blade 6" Wind-driven Rain Louver


APPLICATION

The D-HV-6 utilizes horizontal front blades and vertical rear blades to provide the ultimate in Wind-driven rain protection. This louver carries an AMCA 512 Listing for AMCA 550, and AMCA 540, AMCA certification for pressure drop testing, as well as a Florida Product Approval. It has also been tested and proven to withstand a maximum wind load of +/- 225 psf (ASTM-E330).

 


Model:ES-KD
ES-KD Industrial Wall Housing


APPLICATION

 
ES-KD DOCUMENTS
Submittal Sheet


Model:ES-IP54
ES-IP54 Industrial Wall Housing


APPLICATION

 
ES-IP54 DOCUMENTS
Submittal Sheet

Close Menu