Products

Architectural Louvers, Dampers, Roof Curbs, Actuators, Grilles, Sunshades and more.

 


Model:RD-8
8" Deep, Fixed Vertical Blade, Drainable, Wind/Rain/Sand, Extruded Aluminum


APPLICATION

The model RD-8 is an all weather louver designed to resist rain, sand, and other airborne debris. The model RD-8 was especially designed to capture and remove sand particles without the need for bleed fans. Many applications exist including generator sets in the desert or other sanded environments.

 


Model:RD-4
4" Deep, Fixed Vertical Blade, Drainable, Wind/Rain, Extruded Aluminium


APPLICATION

The Model RD-4 is a vertical blade wind driven rain louver designed to protect the outside opening in building exterior walls. These louvers may be used for exhaust or intake air.

 


Model:RD
Balancing Damper # RD


APPLICATION

A galvanized steel built damper with factory mounted heavy duty locking hand quadrant designed especially for manual balancing applications. It is easy to install, seal, and becomes part of the duct work.

 


Model:RD-WM
Balancing damper #RD-WM


APPLICATION

A round balancing damper that is fabricated to meet Wal-Mart specs.

 


Model:CD-100 J-SR, RD-RR
Model CD-100 J-SR, RD-RR


APPLICATION

The Rod Operated Dampers are designed to provide personal convenience and a positive means of individual room or zone temperature control. We offer three controllers to choose from, and several different damper arrangements.

 


Model:CRD-2HRD
Ceiling Radiation Damper


APPLICATION

The Model CRD-2HRD provides fire and heat radiation protection of HVAC penetrations in floor/ceiling and roof/ceiling assemblies with restrained or unrestrained ratings of 2hrs or less. Standard fire dampers (1.5 & 3hr) do not provide the required protection as a ceiling radiation damper.

 
CRD-2HRD DOCUMENTS
 - Submittal Sheet


Model:CRD-3HRD
Ceiling Radiation Damper


APPLICATION

The Model CRD-3HRD provides fire and heat radiation protection of HVAC penetrations in floor/ceiling and roof/ceiling assemblies with restrained or unrestrained ratings of 2hrs or less. Standard fire dampers (1.5 & 3hr) do not provide the required protection as a ceiling radiation damper.

 
CRD-3HRD DOCUMENTS
 - Submittal Sheet


Model:CRD-2HS1
Ceiling Radiation Damper


APPLICATION

The Model CRD-2HS1 provides fire and heat radiation protection of HVAC penetrations in floor/ceiling and roof/ceiling assemblies with restrained or unrestrained ratings of 2hrs or less. Standard fire dampers (1.5 & 3hr) do not provide the required protection as a ceiling radiation damper.

 
CRD-2HS1 DOCUMENTS
 - Submittal Sheet


Model:CRD-3HS1
Ceiling Radiation Damper


APPLICATION

The Model CRD-3HS1 provides fire and heat radiation protection of HVAC penetrations in floor/ceiling and roof/ceiling assemblies with restrained or unrestrained ratings of 3hrs or less. Standard fire dampers (1.5 & 3hr) do not provide the required protection as a ceiling radiation damper.

 
CRD-3HS1 DOCUMENTS
 - Submittal Sheet


Model:CRD-2HS2
Ceiling Radiation Damper


APPLICATION

The Model CRD-2HS2 provides fire and heat radiation protection of HVAC penetrations in floor/ceiling and roof/ceiling assemblies with restrained or unrestrained ratings of 2hrs or less. Standard fire dampers (1.5 & 3hr) do not provide the required protection as a ceiling radiation damper.

 
CRD-2HS2 DOCUMENTS
 - Submittal Sheet


Model:CRD-3HS2
Ceiling Radiation Damper


APPLICATION

The Model CRD-3HS2 provides fire and heat radiation protection of HVAC penetrations in floor/ceiling and roof/ceiling assemblies with restrained or unrestrained ratings of 3hrs or less. Standard fire dampers (1.5 & 3hr) do not provide the required protection as a ceiling radiation damper.

 
CRD-3HS2 DOCUMENTS
 - Submittal Sheet


Model:CRD-CBLK
Ceiling Radiation Damper Accessory


APPLICATION

Applicable for the insulation of exposed surfaces in rated floor/ceiling and roof/ceiling assemblies. Complies with the requirements of United Enertech's lay-in diffuser installation instructions - ED4 for ceiling radiation damper installation. Can be field cut to meet specific job requirements - either as full 30"x30" sheets or cut into strips as required by the specific application.

 
CRD-CBLK DOCUMENTS
 - Submittal Sheet


Model:CRD-WTA2
Ceiling Radiation Damper


APPLICATION

This specialized set of ceiling damper installations are specifically designed for installation in floor/ceiling and roof/ceiling assemblies of wood truss and gypsum construction. Our standard UL555C listed radiation damper series CRD installed in accordance with our ARL listed instructions will maintain the hourly rating of the roof/ceiling assembly as listed in the UL Fire Resistance Directory. This product may be installed as provided or may optionally be installed utilizing a commercially available transition boot or field provided transition. See appropriate installation instructions for details.

 
CRD-WTA2 DOCUMENTS
 - Submittal Sheet






Model:F/S-RD-I
Combination Fire/Smoke Damper


APPLICATION

 


Model:F/S-RD-II
Combination Fire/Smoke Damper


APPLICATION

 


Model:ES-RD-4V
4" Deep Aluminum Vertical Blade Equipment Screen


APPLICATION

Model ES-RD-4V is a 4" deep extruded aluminum equipment screen with sight proof blades. Blades are spaced approximately 2" apart and supported at braces a minimum of 3 locations.

 


Model:RD-RC
Round Single Blade Damper


APPLICATION

The Model RD-RC was developed for air balancing at the mid/duct above inaccessible ceilings with twisting cable adjustment at a terminal controller.

 



Model:MZD-100
Multi-Zone Damper (Standard Blade)


APPLICATION

Furnish and install at location shown on drawing or in accordance with schedules dampers meeting the following specifications: Rectangular damper shall have 0.125" [3.18mm] extruded aluminum blades and .081" [2.06mm] extruded aluminum frame. 1-1/2" x 8" x 1-1/2" 18ga. galvanized outer sleeve. Optional blade and jamb seals must be used to achieve optimal leakage rating. Damper to have thrust bushings and meet the low pressure drop equal to United Enertech MODEL MZD-100.

 
MZD-100 DOCUMENTS
 - Submittal Sheet


Model:MZD-100-3
Multi-Zone Damper (Triple Deck) (Standard Blade)


APPLICATION

Furnish and install at location shown on drawing or in accordance with schedules dampers meeting the following specifications: Rectangular damper shall have 0.125" [3.18mm] extruded aluminum blades and .081" [2.06mm] extruded aluminum frame. 1-1/2" x 8" x 1-1/2" 18ga. galvanized outer sleeve. Optional blade and jamb seals must be used to achieve optimal leakage rating. Damper to have thrust bushings and meet the low pressure drop equal to United Enertech MODEL MZD-100-3 (Triple-Deck).

 
MZD-100-3 DOCUMENTS
 - Submittal Sheet


Model:ES-D
ES-D Standard Wall Housing


APPLICATION

 
ES-D DOCUMENTS
Submittal Sheet


Model:ES-D2
ES-D2 Standard Wall Housing


APPLICATION

 
ES-D2 DOCUMENTS
Submittal Sheet

Close Menu