Products

Architectural Louvers, Dampers, Roof Curbs, Actuators, Grilles, Sunshades and more.

 


Model:BF
Butterfly Spring Operated Round Damper


APPLICATION

The Model BF is a small, round, aluminum, spring loaded, butterfly damper designed through size 16" diameter for pressure through .30 w.c. The Model BF offers a EDPM rubber gasket and a galvanized steel housing. It can be installed in any position and requires .04 to .08 w.c. to open.

 


Model:CD-100
Opposed Blade, Control, Extr. Alum. up to 3" wg


APPLICATION

The Model CD-100(opposed blade) is a rectangular damper with .125 extruded aluminum blades and .081 extruded aluminum frames. This model can be built in one section up to 52"w x 72"h. If a larger size is required there will be an automatic multi-section charge for jackshafting.

 


Model:CD-110
Opposed Blade, Control, 3V Blade, Steel, up to 4" wg (Rollformed)


APPLICATION

The Model CD-110 (opposed blade) is a rectangular damper that has 16 gauge galvanized steel (3-V shaped) blades, and a galvanized roll formed frame. This model can be built in one section up to 48"w x 60"h, if a larger size is required there will be an automatic multi-section charge for jackshafting.

 


Model:CD-150
Opposed Blade, Control, AF Blade, Extr. Alum. up to 13" wg


APPLICATION

The Model CD-150 (opposed blade) is an extruded aluminum rectangular control damper that has hollow airfoil blades with a .375" thick end nose and a .081" frame. One section can be built up to 60"w x 72"h, if a larger size is required there will be an automatic multi-section charge for jackshafting.

 


Model:H-420
Heavy Duty, Flanged, All Steel, up to 10" w.g.


APPLICATION

The Model H-420 is a heavy duty flanged frame style industrial control damper with 14 guage galvanized steel blades and frame. This model also has a heavy duty linkage and stainless steel sleeve type bearings. One section can be built up to 48"w x 96"h, larger sizes require a multi-section charge for jackshafting.

 


Model:AH-620
Opposed Blade, Heavy Duty, Flanged, Steel Frame, Aluminum Airfoil Blades, up to 13" w.g.


APPLICATION

The Model AH-620 is a heavy duty flange frame style industrial control damper. It has a 10 gauge galvanized steel frame and hollow airfoil extruded aluminum blades. This model also offers heavy duty jamb linkage, 3/4" plated steel axles, and stainless steel sleeve type bearings. For sizes over 60"w x 96"h there is a multi-section charge for jackshafting.

 


Model:H-620
Heavy Duty, Flanged, All Steel, up to 20" w.g.


APPLICATION

The Model H-620 is a heavy duty flanged frame style industrial control damper. It has 10 gauge galvanized symetrically designed blades.

 


Model:NAH-720-1
Opposed Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 20" w.g.


APPLICATION

The model NAH-720-1 is a heavy duty flanged frame style industrial control damper that has steel formed airfoil blades.

 


Model:NAH-720-2
Opposed Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 30" w.g.


APPLICATION

The model NAH-720-2 is a heavy duty flanged frame style industrial control damper that has steel formed airfoil blades.

 


Model:NAH-720-3
Opposed Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 35" w.g.


APPLICATION

The Model NAH-720-3 is a heavy duty flanged frame style industrial control damper. It is designed to control airflow and provide shutoff in hvac or industrial process control systems. This model is available in parallel or opposed blade action.

 


Model:NAH-720-4
Opposed Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 40" w.g.


APPLICATION

The Model NAH-720-4 is an extremely heavy duty industrial steel airfoil control damper that is rated up to 40" w.g. This damper has 3/8" galvanized steel frame and 12 gauge double skin construction airfoil blades. The NAH-720-4 can also be manufactured in all stainless steel construction.

 


Model:CD-160
Opposed Blade, Control, AF Blade, Steel, up to 13" wg (Rollformed)


APPLICATION

The model CD-160 (opposed blades) has double thick, galvanized steel airfoil blades and a galvanized steel frame.

 


Model:ICBL-20
ICBL-20 (Heavy Duty Blast Damper / Shock Tube Tested)


APPLICATION

The ICBL-20 is designed for protection against sudden blasts and instantaneous pressure changes. Can be flange mounted and constructed from various materials.

 


Model:CD-100-RP
CD-100-RP (Rectangular rod in duct operated)


APPLICATION

The Model CD-100-RP is the extruded aluminum CD-100 rectangular control damper that includes a rack & pinion allowing the damper to work with a remote control system.

 


Model:FL-ID-4
4" Deep, Intake/Discharge, Extruded Aluminum


APPLICATION

Model FL-ID-4 is a specialty louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable head with both high free area exhaust blades at the top and weather protective intake blades at the bottom, allowing both air discharge and intake ductwork to be hooked up behind the louver while preventing the short cycling of air. The FL-ID-4 is an extremely efficient louver enabling designers to select and apply with confidence.

 


Model:BVE
Block, Extruded Aluminum


APPLICATION

The Brick Vent Models BVE and BVF are now manufactured by United Enertech. They provide a permanent means of ventilation for crawl space, hung ceilings,incinerator rooms, chimney flues,foundations,pipe spaces and corridors. These models also have water stops and deep overlapping blades, each with integral storm drip,providing maximum resistance to rain and weather.

 


Model:XAC-6, 9
12" Deep, Formed Steel


APPLICATION

The model XAC-6 is a 12" deep acoustical louver that has 6" blade spacing. Blades are on a 45 degree, 18 guage galvanized steel construction, and are filled with a sound absorber of advanced microfibers composed of polyester and polyolefin. Frames are 18 gauge galvanized steel. See submittal for sound data. The model XAC-9 is 12" deep acoustical louver with blades on a 45 degree and 9" spacing. Blades are 18 gauge galvanized steel and are filled with a sound absorber of advanced microfibers composed of polyester and polyolefin. Frames are 18 gauge galvanized steel. See submittal for sound data.

 


Model:AXF-12
12" Deep, Airfoil Blade, Formed Steel


APPLICATION

The Model AXF-12 is an acoustical louver with airfoil blades filled with a sound absorber of advanced microfibers composed of polyester and polyolefin. Frames are 18 gauge galvanized steel and blades are 18 gauge galvanized steel. See submittal for sound data.

 


Model:XAC-4
8" Deep, Formed Steel


APPLICATION

The Model XAC-4 is an 8" deep acoustical louver. The standard construction of the XAC-4 has an 18 gauge galvanized frame, 18 gauge galvanized blades and an sound absorber of advanced microfibers composed of polyester and polyolefin. See submittal for sound data.

 


Model:AXF-8
8" Deep, Airfoil Blade, Formed Steel


APPLICATION

The Model AXF-8 is an 8" deep acoustical louver. The AXF-8 has airfoil blades that are filled with an insulation of advanced microfibers composed of polyester and polyolefin. The frame is 18 gauge galvanized steel, blades are 18 gauge galvanized steel. See submittal for sound data.

 


Model:XL-4
4" Deep, Formed Steel


APPLICATION

The Model XL-4 is a 4" deep acoustical louver that has an 18 guage galvanized frame and 18 gauge galvanized blades. It also offers a sound absorber of advanced microfibers composed of polyester and polyolefin. Please see submittal for sound data.

 


Model:RD-8
8" Deep, Fixed Vertical Blade, Drainable, Wind/Rain/Sand, Extruded Aluminum


APPLICATION

The model RD-8 is an all weather louver designed to resist rain, sand, and other airborne debris. The model RD-8 was especially designed to capture and remove sand particles without the need for bleed fans. Many applications exist including generator sets in the desert or other sanded environments.

 


Model:DCFL-D-4
4" Deep, Fixed Blade, Drainable, Extruded Aluminum


APPLICATION

The Model DCFL-D-4 is a 4" deep extruded aluminum drainable louver that has been tested and approved per Miami-Dade County, Florida Building Code, and Texas Department of Insurance requirements.

 


Model:DCFL-D-6
6" Deep, Fixed Blade, Drainable, Extruded Aluminum


APPLICATION

The Model DCFL-D-6 is a 6" deep extruded aluminum drainable louver that has been tested and approved per Miami-Dade County, Florida Building Code, and Texas Department of Insurance requirements.

 


Model:VV-10-D
6" Deep, Vertical Fixed Blade, Drainable, Wind/Rain, Extruded Aluminum


APPLICATION

The Model VV-10-D is a 6" deep vertical blade hurricane resistant louver. This model is approved for Miami-Dade County installations. It is also approved for installations in accordance with the 2014 Florida Building Code for both high velocity hurricane zones and non high velocity hurricane zones.

 


Model:SED-4
4" Deep, Fixed Blade, Drainable, Wind/Rain, Extruded Aluminum


APPLICATION

The Model SED-4 is a 4" deep fixed extruded aluminum sight proof louver that is AMCA licensed for wind and air.

 


Model:RD-4
4" Deep, Fixed Vertical Blade, Drainable, Wind/Rain, Extruded Aluminium


APPLICATION

The Model RD-4 is a vertical blade wind driven rain louver designed to protect the outside opening in building exterior walls. These louvers may be used for exhaust or intake air.

 


Model:SED-5.1
SUPERSEDED -- see XSD-130


APPLICATION

The SED-5.1 has been superseded by the XSD-130. The new product is the same price for better performance.

 


Model:VV-10
6" Deep, Fixed Vertical Blade, Drainable, Wind/Rain, Extruded Aluminum


APPLICATION

The Model VV-10 is a vertical blade wind driven weather louver.

 


Model:SFL-2
2" Deep, Fixed "J" Blade, Formed Steel


APPLICATION

The SFL-2 is a 2" deep steel non-drainable louver.

 


Model:VF-2
2" Deep, Fixed Chevron Blade, Extruded Aluminum


APPLICATION

The model VF-2 is a 2" deep extruded aluminum fixed "chevron" blade louver.

 


Model:EL-4
4" Deep, Fixed Blade, Extruded Aluminum


APPLICATION

The model EL-4 is a 4" deep extruded aluminum fixed non-drainable louver. This model is AMCA certified and can be used for exhaust or intake air.

 


Model:EL-6
6" Deep, Fixed Blade, Extruded Aluminum


APPLICATION

The model EL-6 is a 6" deep extruded aluminum fixed non-drainable louver. This model is AMCA certified and can be used for exhaust or intake air.

 


Model:SFL-4
4" Deep, Fixed "J" Blade, Formed Steel


APPLICATION

The Model SFL-4 is a 4" deep fixed non-drainable steel louver. The design of this model incorporates a J style blade and high free area to provide maximum resistance to rain and weather while providing minumum resistance to airflow.

 


Model:SFL-6
6" Deep, Fixed "J" Blade, Formed Steel


APPLICATION

The Model SFL-6 is a 6" deep fixed non-drainable steel louver. The design of this model incorporates J style blades and high free area to provide maximum resistance to rain and weather while providing minimum resistance to airflow.

 


Model:FL-D-2
2" Deep, Fixed Blade, Drainable, Extruded Aluminum


APPLICATION

The Model FL-D-2 is a 2" deep fixed drainable extruded aluminum louver. When the FL-D-2 was licensed by the AMCA laboratory it was shown to allow .01 oz/per SQ FT of water penetration at 805 FPM and have a free area over 53%.

 


Model:FL-D-4
4" Deep, Fixed Blade, Drainable, Extruded Aluminum


APPLICATION

The Model FL-D-4 is a 4" deep extruded aluminum fixed drainable louver. (AMCA Licensed) at 1056 FPM only .01 oz/per sq. ft. water penetration and a free area of over 50%.

 


Model:SFL-D-4
4" Deep, Fixed Blade, Formed Steel, Drainable


APPLICATION

SFL D-4 is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates drainable blades and high free area to provide maximum resistance to rain and weather while providing minimum resistance to airflow.

 


Model:D-DR-4
4" Deep, Fixed Blade, Double Drainable, Extruded Aluminum


APPLICATION

The Model D-DR-4 is a weather louver designed to protect the outside opening in building exterior walls. These louvers may be used for exhaust or intake air. This model incorporates dual drainable blades and dual downspout jambs and gutter design for high performance.

 


Model:D-DR-6
6" Deep, Fixed Blade, Double Drainable, Extruded Aluminum


APPLICATION

The Model D-DR-6 is a weather louver designed to protect the outside opening in building exterior walls. These louvers may be used for exhaust or intake air. This model incorporates dual drainable blades and dual downspout jambs and gutter design for high performance.

 


Model:CFL-D-4
4" Deep, Drainable, Extruded Aluminum


APPLICATION

The Model CFL-D-4 is a 4" deep extruded aluminum drainable louver combination damper designed for both intake and exhaust air. This Model incorporates drainable blades and downspout jambs for high performance.

 


Model:CFL-D-6
6" Deep, Drainable, Extruded Aluminum


APPLICATION

The Model CFL-D-6 is a 6" deep extruded aluminum drainable louver damper combination. That can be used for exhaust or intake air. AMCA Licensed

 


Model:SAFL-4
4" Deep, Adjustable, "J" Blade, Formed Steel


APPLICATION

The Model SAFL-4 is a formed steel adjustable louver. The SAFL-4 incorporates J style blades and high free area to provide maximum resistance to rain and weather while providing minimum resistance to airflow.

 


Model:SAFL-6
6" Deep, Adjustable, "J" Blade, Formed Steel


APPLICATION

The Model SAFL-6 is a 6" deep adjustable galvanized steel louver. This model combines a J style blade with high free area to provide maximum resistance to rain and weather and minimum resistance to airflow.

 


Model:AFL-D-4
4" Deep, Adjustable Blade, Extruded Aluminum


APPLICATION

The Model AFL-D-4 is a high performance extruded aluminum adjustable drainable louver. The Model AFL-D-4 can be used for exhaust or intake air. AMCA Licensed

 


Model:AFL-D-6
6" Deep, Adjustable Blade, Extruded Aluminum


APPLICATION

The model AFL-D-6 is a 6" deep extruded aluminum adjustable drainable louver. That can be used for exhaust and intake air. AMCA Licensed

 


Model:PFL-D-4
4" Deep, Drainable, Extruded Aluminum


APPLICATION

The Model PFL-D-4 is a 4" deep drainable extruded aluminum louvered penthouse. When AMCA certified the louvers in this penthouse allowed less than .01 oz/sq.ft. at 1250 fpm (test limit) and still had a free area above 50%.

 


Model:PEL-4-SN
4" Deep, "J" Blade, Drainable, Snow & Harsh Weather, Extruded Aluminum


APPLICATION

The Model PEL-4-SN is a high performance penthouse designed for harsh weather such as rain and snow storms. The roof of the PEL-4-SN has a standard undercoat insulation to prevent condensation and reduce reflective light.

 


Model:PFL-D-6.1
6" Deep, Drainable, Extruded Aluminum


APPLICATION

The Model PFL-D-6.1 is a high performance penthouse consisting of 6" deep fixed drainable extruded aluminum louvers.

 


Model:PEL-4
4" Deep, "J" Blade, Extruded Aluminum


APPLICATION

The Model PEL-4 is a penthouse consisting of 4" deep fixed non-drainable extruded aluminum louvers. This penthouse offers boxed or mitered corners.

 


Model:AFPD
Angled Face Drop Diffuser/Plenum


APPLICATION

The model AFPD is a drop diffuser plenum that offers angled double deflection grilles. This model can be custom built up to 100,000 cfm.

 


Model:Hinged Perforated Soffit Panels
Perforated Filler Panels (relief or intake soffit air)


APPLICATION

 
HINGED PERFORATED SOFFIT PANELS DOCUMENTS
 - Product Specifications


Model:MI-A , OB-A
Small Motorized Dampers


APPLICATION

The Models MI-A (round) and OB-A (rectangular) are small motorized dampers. The Model MI-A is galvanized and includes a low leak gasket as well as an actuator with minimum position stop. The Model OB-A has .081 extruded aluminum frame and blades, minimum position stop actuator, and bronze oilite bearings.

 


Model:ED
Economy Balancing Damper #ED


APPLICATION

An ideal manual balancing damper for duct up to 18" round.

 


Model:RI-F
Round Damper Flanged up to 6


APPLICATION

The Model RI-F is a round control damper with a flanged style frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety of optional features makes the Model RI-F extremely versatile, allowing its capabilities to be tailored to the application.

 


Model:RI-F-O
Oval Damper Flanged up to 5


APPLICATION

The Model RI-F-O is an Oval control damper with a flanged style frame. It is designed to control airflow and provide shutoff in HVAC or industrial process control systems.

 


Model:UCC-5
Self-Flashing, Non-Insulated Curb for Insulating in the field


APPLICATION

The Model UCC-5 is a one-piece curb with 18ga. Galvanized steel shell, 12" minimum height, 1x4 pressure treated wood nailer, non-insulated with welded corners, 3" mounting flange.

 


Model:M-9, 10, 11
Thermal Wax Activated Backdraft Damper


APPLICATION

The M-Series is a vertical or horizontal mounted backdraft damper that is designed to allow vertical or horizontal airflow. It also eliminates the use of an electric motor on an intake damper located at far walls. In addition, the M-Series may be used at fan discharge to decrease the static pressure at fan, thus improving fan performance. An optional end switch to start a fan is also available.

 
M-9, 10, 11 DOCUMENTS
 - Submittal Sheet


Model:MI-MZ-1, OB-MZ-1
Modulating Motorized Damper for Low Pressure Systems


APPLICATION

The MZ systems are simple, stand alone, single zone systems that work independently of the HVAC unit to maintain temperature setpoint.

 


Model:FVE
Block, Extruded Aluminum


APPLICATION

The Model FVE is a load bearing block (including morter ribs) foundation vent designed for flood waters. The FVE has a high free area and is available with a debris screen as an option. When a screen in requiried, it adds a factor of 5 as designers size vents for the flood hazard area. Water flow occurs as rising water approaches and resides. The FVF is a flanged model without the block loading features and without morter ribs.

 


Model:BB-S
Maximum Security Sleeved Barrier


APPLICATION

 


Model:MS-SP
Medium Security


APPLICATION

 


Model:UCC-Vented
Vented Conventional Roof Curb


APPLICATION

UCC-Vented is a one-piece vented curb with 18ga. Galvanized steel shell and baseplate; available in UCC-1, 2, 3 & 5 models.

 


Model:UCC-3
Self-Flashing, Insulated Curb for Single Ply EPDM Roof


APPLICATION

The UCC-3 is a one-piece curb with 18ga. Galvanized steel shell and baseplate; 12" minimum height, 2x2 pressure treated wood nailer, insulated, internal angle reinforcing with welded corners, 2" mounting flange, self flashing for single-ply EPDM roofing.

 


Model:UCC-2
Integral Cant, Insulated Curb for non-Insulated Roof Deck


APPLICATION

The UCC-2 is a one-piece curb with 18ga. Galvanized steel shell and baseplate; 8" minimum height, 2x2 pressure treated wood nailer, insulated, internal angle reinforcing with welded corners, 1" mounting flange, for non-insulated roof decks.

 


Model:UCC-1
Raised Cant, Insulated Curb for Built-up Insulated Roof


APPLICATION

The UCC-1 is a one-piece curb with 18ga. Galvanized steel shell and baseplate, 10" minimum height, 2x2 pressure treated wood nailer, insulated, internal angle reinforcing with welded corners, 1" mounting flange, with raised cant for insulated roof decks.

 


Model:UES-1
Raised Cant


APPLICATION

The UES-1 has an 18ga. Galvanized steel shell and baseplate, 10" minimum height, 2x4 pressure treated wood nailer, raised cant, c-channel bulkheads as required, fully welded one-piece construction, 20ga. galvanized counterflashing. All welds prime painted after fabrication.

 


Model:PSED-5.1
Wind Driven, Sight Proof, Drainable, Extruded Aluminum


APPLICATION

 


Model:PVV-10
Vertical Blade, Wind Driven, Drainable, Extruded Aluminum


APPLICATION

 


Model:FL-D-6.1
High Performance Fixed Louver 6" Deep


APPLICATION

The Model FL-D-6.1 is a weather louver designed to protect the outside opening in the building exterior walls. These louvers may be used for exhaust or intake air. This model incorporates drainable blades and downspouts jamb and gutter design for high performance.

 


Model:SFL-D-2
2" Deep, Fixed Blade, Formed Steel, Drainable


APPLICATION

SFL-D-2 is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates drainable blades and high free area to provide maximum resistance to rain and weather while providing minimum resistance to airflow.

 


Model:SFL-D-6
6" Deep, Fixed Blade, Formed Steel, Drainable


APPLICATION

SFL-D-6 is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates drainable blades and high free area to provide maximum resistance to rain and weather while providing minimum resistance to airflow.

 


Model:RH-Series
Fan Powered Roof Top Ventilator


APPLICATION

Furnish and install for roof intake or exhaust ventilation applications which have high air flow capabilities.

 
RH-SERIES DOCUMENTS
 - Submittal Sheet


Model:ED-I
Manual Balancing Damper #ED-I


APPLICATION

The Model ED-I is an ideal manual balancing damper with the added ability of complete shut-off for control. For use in up to 12" round duct.

 


Model:FD-ACMH
Type A Curtain Fire Damper - Welded - Round / Oval / Rectangular Option


APPLICATION

 
FD-ACMH DOCUMENTS
 - Submittal Sheet


Model:FD-ACHP
Type C Curtain Fire Damper - Welded - Round / Oval / Rectangular Option


APPLICATION

 
FD-ACHP DOCUMENTS
 - Submittal Sheet


Model:ANG
Framed Retaining Angles


APPLICATION

 


Model:BVF
Flanged, Extruded Aluminum


APPLICATION

The Brick Vent Models BVE and BVF are now manufactured by United Enertech. They provide a permanent means of ventilation for crawl space, hung ceilings,incinerator rooms, chimney flues,foundations,pipe spaces and corridors. These models also have water stops and deep overlapping blades, each with integral storm drip,providing maximum resistance to rain and weather.

 


Model:FVF
Flanged, Extruded Aluminum


APPLICATION

The Model FVE is a load bearing block (including morter ribs) foundation vent designed for flood waters. The FVE has a high free area and is available with a debris screen as an option. When a screen in requiried, it adds a factor of 5 as designers size vents for the flood hazard area. Water flow occurs as rising water approaches and resides. The FVF is a flanged model without the block loading features and without morter ribs.

 


Model:CD-120, 121
Formed Steel Frame & 3v Blades, up to 12" w.g.


APPLICATION

Formed Steel Control Damper, 3v Blades, up to 12" w.g.

 


Model:CD-170, 171
Formed Steel Frame & Airfoil Blades, Class I thru III


APPLICATION

Formed Steel Control Damper, Airfoil Blades, Class I thru III

 
CD-170, 171 DOCUMENTS
 - Submittal Sheet


Model:CD-170, 171
Formed Steel Frame & Airfoil Blades, Class I thru III


APPLICATION

Formed Steel Control Damper, Airfoil Blades, Class I thru III

 
CD-170, 171 DOCUMENTS
 - Submittal Sheet


Model:CD-170, 171
Formed Steel Frame & Airfoil Blades, Class I thru III


APPLICATION

Formed Steel Control Damper, Airfoil Blades, Class I thru III

 
CD-170, 171 DOCUMENTS
 - Submittal Sheet


Model:CD-170, 171
Formed Steel Frame & Airfoil Blade Damper


APPLICATION

Formed Steel Frame & Airfoil Blade Damper

 
CD-170, 171 DOCUMENTS
 - Submittal Sheet


Model:CD-170, 171
Formed Steel Frame & Airfoil Blade Damper, Class I thru III


APPLICATION

Formed Steel Frame & Airfoil Blade Damper, Class I thru III

 


Model:EL-2
2" Deep Fixed J/K Blade Louver


APPLICATION

The Model EL-2 is a 2" deep J/K blade louver designed to protect the outside opening in building exterior walls. These louvers may be used for exhaust or intake air.

 


Model:MD-105
Opposed Blade, Balancing, Extr. Alum. up to 3" wg


APPLICATION

Extruded Aluminum Manual Balancing Damper with opposed blade action.

 


Model:MD-115
Opposed Blade, Balancing, 3V Blade, Steel, up to 4" wg (Rollformed)


APPLICATION

Roll-formed galvanized Steel frame, Heavy Duty 16 ga. galvanized Steel Blade with opposed action.

 


Model:DCSED-5.1
5" Deep, Fixed Horiz. Blade, Extruded Aluminum Wind-Driven Rain / Hurricane Louver


APPLICATION

The Model DCSED-5.1 is a sight proof, drainable, wind-driven rain louver which incorporates a series of (11) vertical and (5) horizontal drains designed to protect the outside opening in building exterior walls. It is engineered for use in Miami-Dade County, FL and its municipalities as well as other regions that use Dade County codes. These louvers may be used for exhaust or intake air. Engineers can design with confidence as this product complies wi0th the Miami-Dade County Building Code. Model DCSED-5.1 is also approved for the 2014 version of the FBC as well as the Texas Department of Insurance.

 


Model:CD-111
Parallel Blade, Control, 3V Blade, Steel, up to 4" wg (Rollformed)


APPLICATION

The Model CD-111 (parallel blade) is a rectangular damper that has 16 gauge galvanized steel (3-V shaped) blades, and a 16 gauge galvanized steel frame. This model can be built in one section up to 48"w x 60"h, if a larger size is required there will be an automatic multi-section charge for jackshafting.

 


Model:CD-161
Parallel Blade, Control, AF Blade, Steel, up to 13" wg (Rollformed)


APPLICATION

The model CD-161 (parallel blade) has double thick, galvanized steel airfoil blades and galvanized steel frame.

 


Model:MD-116
Parallel Blade, Balancing, 3V Blade, Steel, up to 4" wg (Rollformed)


APPLICATION

Roll-formed galvanized Steel frame, Heavy Duty 16 ga. galvanized Steel Blade with parallel action.

 


Model:OD-M
Orifice Damper - Motorized


APPLICATION

Orifice Damper, Galvanized Steel Construction, Modulating Motor control, for Airflow Measurement.

 


Model:OD-PS
Orifice Damper - Positive Sealed


APPLICATION

Positive Sealed Orifice Damper, Galvanized Steel construction, Modulating Motor, For Airflow Measurement.

 


Model:PEL-4EV
4" deep Aluminum Louvered Penthouse/Elevator Vent


APPLICATION

The PEL-4EV is a 4" deep Aluminum Louvered Penthouse/Elevator Vent with one side made of 1/8" annealed glass, and three louvered sides. The included roof curb is made of 12 ga galvanized steel. This model is available with and optional class I or class II smoke damper.

 


Model:EL-D-4
4" Deep Fixed Drainable Aluminum louver


APPLICATION

The Model EL-D-4 is a louver designed to protect the outside opening in building exterior walls. These louvers may be used for exhaust or intake air.

 


Model:FD-ACMH
Curtain Fire Damper - Caulk Sealed -1-1/2 & 3 Hour - Static up to 10" Static Pressure - Optional Sleeve - Round, Oval & Rectangular Transition Optional


APPLICATION

UL classified for installation in walls, floors, and partitions with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in static HVAC systems that automatically shuts down in the event of fire. (See optional 3 hr. rating)

 


Model:FD-ACHP
Curtain Fire Damper - Welded - 1-1/2 & 3 Hour - Static up to 12" Static Pressure - Optional Sleeve - Round, Oval & Rectangular Transition Optional


APPLICATION

UL classified for installation in walls, floors, and partitions with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in static HVAC systems that automatically shuts down in the event of fire. (See optional 3 hr. rating)

 


Model:FD-SAVG
Curtain Fire Damper - 1-1/2 & 3 Hour - Vertical Static - Sleeved - Behind Grille


APPLICATION

UL classified for installation in walls, and partitions with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in static HVAC systems that automatically shuts down in the event of fire. (See optional 3 hr. rating)

 


Model:FD-SAHG
Curtain Fire Damper - 1-1/2 & 3 Hour - Horizontal Static - Sleeved - Behind Grille


APPLICATION

UL classified for installation in floors, and partitions with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in static HVAC systems that automatically shuts down in the event of fire. (See optional 3 hr. rating)

 


Model:FDD-SAVG
Curtain Fire Damper - 1-1/2 & 3 Hour - Vertical Dynamic - Sleeved - Behind Grille


APPLICATION

UL classified for installation in walls, and partitions with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in dynamic HVAC systems that automatically shuts down in the event of fire. Also approved for static systems. (See optional 3 hr. rating)

 


Model:FDD-SAHG
Curtain Fire Damper - 1-1/2 & 3 Hour - Horizontal Dynamic - Sleeved - Behind Grille


APPLICATION

UL classified for installation in floors, and partitions with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in dynamic HVAC systems that continues to run in the event of fire. Also approved for static systems. (See optional 3 hr. rating)

 


Model:FD-AOW
Curtain Fire Damper - 1-1/2 Hour - Static - Sleeved - Out of Wall


APPLICATION

UL classified for installation the grille and damper assembly does not allow for mounting in the plane of the fire barrier with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in static HVAC systems that shuts down in the event of fire.

 


Model:FDD-AOW
Curtain Fire Damper - 1-1/2 Hour - Dynamic - Sleeved - Out of Wall


APPLICATION

UL classified for installation the grille and damper assembly does not allow for mounting in the plane of the fire barrier with a fire rating of less than 3 hours. This damper may be installed vertically or horizontally in dynamic HVAC systems that continues to run in the event of fire.

 


Model:SOLARIS SERIES
6-1/2" Airfoil Blade/Tapered Outrigger Sunshade


APPLICATION

The Solaris Series Sunshade is made up of 6-1/2" wide Airfoil Blades, Tapered Outriggers, & 1-3/4" x 4" Fascia Tube.

 


Model:SENTRY SERIES
4" Airfoil Blade/Tapered Outrigger Sunshade


APPLICATION

The Sentry Series Sunshade is made up of 4" wide Airfoil Blades & Tapered Outriggers.

 


Model:CRIMSON SERIES
6" Airfoil Blade, Monumental/Tapered Outrigger Sunshade


APPLICATION

The Crimson Series Sunshade is made up of 6" wide Airfoil Blades & Monumental/Dual Tapered Outriggers.

 


Model:SOLARIUM SERIES
4" Z-Blade/Tapered Outrigger Sunshade


APPLICATION

The Solarium Series Sunshade is made up of 4" wide Z-Blades, Tapered Outriggers, & Round Tube Fascia.

 


Model:MODESTO SERIES
6-1/2" Batten Blade/Perforated Side Panel Sunshade


APPLICATION

The Modesto Series Sunshade is made up of 6-1/2" wide Batten Blades, Bull Nose Fascia, Tapered Outriggers, & Perforated or Solid Skin Side Panels

 


Model:CAMANA SERIES
Perforated or Solid Skin Sunshade/Lightshelf


APPLICATION

The Camana Series Sunshade/Lightshelf is available with perforated or solid metal skin.

 


Model:DESIGNER SERIES
Custom Designed Sunshades


APPLICATION

The Designer Series Sunshade Line is just what the name implies. Architects and Designers can create a job specific sunshade design from a variety of blade, outrigger, and fascia choices.

 


Model:AH-621
Parallel Blade, Heavy Duty, Flanged, Steel Frame, Aluminum Airfoil Blades, up to 13" w.g.


APPLICATION

The Model AH-621 is a heavy duty flange frame style industrial control damper. It has a 10 gauge galvanized steel frame and hollow airfoil extruded aluminum blades. This model also offers heavy duty jamb linkage, 3/4" plated steel axles, and stainless steel sleeve type bearings. For sizes over 60"w x 96"h there is a multi-section charge for jackshafting.

 


Model:NAH-721-1
Parallel Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 20" w.g.


APPLICATION

The model NAH-721-1 is a heavy duty flanged frame style industrial control damper that has steel formed airfoil blades.

 


Model:NAH-721-2
Parallel Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 30" w.g.


APPLICATION

The model NAH-721-2 is a heavy duty flanged frame style industrial control damper that has steel formed airfoil blades.

 


Model:NAH-721-3
Parallel Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 35" w.g.


APPLICATION

The Model NAH-721-3 is a heavy duty flanged frame style industrial control damper. It is designed to control airflow and provide shutoff in hvac or industrial process control systems. This model is available in parallel or opposed blade action.

 


Model:NAH-721-4
Parallel Blade, Heavy Duty, Flanged, All Steel, Airfoil Blades, up to 40" w.g.


APPLICATION

The Model NAH-721-4 is an extremely heavy duty industrial steel airfoil control damper that is rated up to 40" w.g. This damper has 3/8" galvanized steel frame and 12 gauge double skin construction airfoil blades. The NAH-720-4 can also be manufactured in all stainless steel construction.

 


Model:Insulated Curb Cover
Insulated Curb Cover


APPLICATION

 


Model:CD-75/76
Thinline Opposed/Parallel Blade Damper


APPLICATION

3" deep streamline blade aluminum control damper

 


Model:BRSED-5.1
5" Deep Blast Rated Wind Driven Rain Louver


APPLICATION

The BRFL-D-4 has been blast tested in accordance with ASTM F2927-12 to withstand a blast of up to 10.48 psi and an impulse of 64 psi-ms. The test yielded a damage rating of I (undamaged) with no breakage and minimal deflection (less than 1/8").

 


Model:CLARION SERIES
Vertical Perforated Sunshade


APPLICATION

Extruded Aluminum tube frame with integral tray to hold perforated alum. panels.

 


Model:PALISADE SERIES
Vertical dual panel perforated screen


APPLICATION

Extruded Aluminum tube frame with dual aluminum perforated panels.

 


Model:C-SR-WTP
Wood Truss Ceiling Radiation Damper (Field Supplied Plenum)


APPLICATION

The C-SR-WTP is a rectangular UL Classified ceiling (radiation) damper, butterfly style, approved for steel duct, flex duct, and ductless installations in approved UL wood truss ceiling/floor and ceiling/roof designs. These dampers provide protection in openings up to 324 square inches in area (see standard size chart on submittal data sheet). These dampers must be equipped with either a field assembled insulated duct board outlet box, a minimum 22 ga steel boot with side outlet, or minimum 26 ga steel insulated boot with side outlet installed on the damper to meet UL requirements.

 



Model:D-HFA-6
High Performance 6" Fixed Louver


APPLICATION

D-HFA-6 resists water intrusion while providing an extremely high free area and low pressure drop.

 


Model:C-SR-WTPS
Wood Truss Ceiling Radiation Damper (Field Supplied Plenum)


APPLICATION

The C-SR-WTPS is a rectangular UL Classified ceiling (radiation) damper, single blade style, approved for steel duct, flex duct, and ductless installations in approved UL wood truss ceiling/floor and ceiling/roof designs. These dampers provide protection in openings up to 324 square inches in area (see standard size chart on submittal data sheet). These dampers must be equipped with either a field assembled insulated duct board outlet box, a minimum 22 ga steel boot with side outlet, or minimum 26 ga steel insulated boot with side outlet installed on the damper to meet UL requirements.

 


Model:SED-2
2" Deep Sight Proof Weather Louver


APPLICATION

The SED-2 is an AMCA licensed, sight proof, weather louver that has been tested for water penetration and pressure drop.

 


Model:XSD-180
7" Deep, High Performance Sight Proof Fixed Louver


APPLICATION

The XSD-180 is a 7" deep, high performance, sight proof, fixed louver. It is licensed to bear the AMCA Certified Ratings Seal for water penetration, air performance, and wind-driven rain. The XSD-180 carries a class A, 29 mph wind-driven rain rating up to 688 fpm (core velocity), and a class A, 50 mph wind-driven rain rating up to 590 fpm (core velocity).

 


Model:D-HFA-4
High Performance 4" Fixed Louver


APPLICATION

D-HFA-4 resists water intrusion while providing an extremely high free area and low pressure drop.

 

Close Menu